|
|
Parts
list for Ultra Grind+ |
) Lid Assembly Version 1 ELGR2L03 |
Description: This old version of lid assembly has the center
roller holding locket in-line with the lid and is made of metal. $60 
|
|
)
Lid Assembly Version 2 ELGR2L04 |
Description: This new version of lid assembly has the center
roller holding locket protruding outside and is made of white plastic. $60
|
|
) Purple Lid ELGR2L49 |
$10
|
|
) SS Drum ELGR2L51 |
Out
of stock
|
|
) Atta kneader Version 1 ELGR2L05 |
Description:
This atta kneader fits the units bought before 2002. Out of Stock |
|
)
Atta kneader
Version 2 ELGR2L06 |
Description:
This atta kneader fits the units bought after 2002. Out of stock |
|
Stone Assembly Version 1 ELGR2L08 |
Description:
This stone assembly fits the units bought before 2002. The top of the
stem has a spring mechanism. The Wiper nut is close to
the stem as pictured. This Stone assembly fits the unit with "Lid
Assembly Version 1" Out of Stock |
|
)
Stone
Assembly Version 2 ELGR2L07 |
Description:
This stone assembly fits the units bought after 2002. The Wiper nut is
close to the white plastic Wiper as pictured. This Stone assembly fits
the unit with "Lid Assembly Version 2" Out of Stock |
|
)
Stone
Assembly Version 3 ELGR2L12 |
Description:
This stone assembly fits the units bought after 2002 and is the latest
version. It is the similar to version 2 but with a different Wiper. The Wiper nut is close to the stem as pictured. This Stone
assembly fits the unit with
"Lid Assembly Version 2" Out of Stock |
|
) Roller Holder Assembly Version 1
ELGR2L09
|
Description:
This Roller Holder Assembly fits the units bought before 2002. The top of the
stem has a spring mechanism. The Wiper nut is close to
the stem as pictured. This Roller Holder assembly fits the unit with "Lid
Assembly Version 1" Out of Stock |
|
Roller
Holder Assembly ELGR2L55
|
Description:
This Roller Holder Assembly fits the units bought after 2002. The Wiper nut is
close to the white plastic Wiper as pictured. This Roller Holder assembly fits
the unit with "Lid Assembly Version 2"
$60
|
|
Roller
Holder Assembly ELGR2L61
|
Description:
This Roller Holder Assembly fits the units bought after 2002. It is the
similar to version 2 but with a different Wiper. The Wiper nut is close
to the stem as pictured. This Roller Holder assembly fits
the unit with
"Lid Assembly Version 2"
$60
|
|
Wiper Version 1
|
Description: This model of Wiper came with older grind + units. This wiper assembly fits the units where the wiper
is detachable from the horizontal SS rod. You can remove the old wiper
by simply pulling it out by hand.The wiper has a
flexible colorless plastic insert at the end.
This model is discontinued. If you need to replace this wiper, you can
purchase Wiper version 2.The replacement wiper is a
single delrin piece only (no SS rod).
$25 |
|
Wiper Version 2 ELGR2L59
|
Description: The Wiper nut is close to the white plastic Wiper. This Wiper fits the units where the wiper
is detachable from the horizontal SS rod. You can remove the old wiper
by simply pulling it out by hand. The replacement wiper is a
single white piece only (no SS rod).
This version will be the replacement for Wiper Version 1 $25 |
|
) Wiper Version 3
ELGR2L10
|
Description: The wiper comes
with the molded SS horizontal rod. The Wiper nut is close to the stem of
roller holder assembly. $25
|
|
)
Switch
pad ELGR2L29 |
Description: The plastic cover on the On/Off switch
$10
|
|
) Taper Roller Stone ELGR2L56 |
Out of Stock |
|
) Roller Lock Screw
ELGR2L58 |
$5
|
|
) Delrin Collar Pad
ELGR2L34 |
$
5
|
|
)
Hinge Pin ELGR2L46 |
$5
|
|
) Blue Button
ELGR2L48 |
$5
for a set of 4
|
|
|
$15
|
|
Privacy policy | Site map | TermsofUse/Disclaimer | Support | FeedBack Copyright © 1998 iNNo Concepts Inc. All rights reserved |
)
)
)
)
)
){kind=small}
